Print
Category: Rocketry

A while back I made up a rocket stand using Balsa. And while it served it's purpose just fine, I thought that I'd have a crack at creating one with the laser.

Horizontal Rocket Stand - Laser Cut Acrylic.
Click to Embiggen


I created the design in Corel Draw and cut it from 3mm acrylic. I used a heat gun to soften the area of each bend (There's a small notch to indicate where the bend should be). Once formed into shape, it only took a moment for the acrylic to go hard again.

Horizontal Rocket Stand - Laser Cut Acrylic.
Click to Embiggen


I have uploaded the file onto Thingiverse if you want to make one yourself :)